Call Us For A Free Estimate

157 Like Unlike

We were called by a local cabin company to go out and look at a roof that was making a loud banging sound. The following was what I found

More than just a loose panel.

  1. 1
    Crack in metal panel #1

    Once I came up over the roof I saw there was a crack in the panel and looked around and noticed a few more but this was the first one I saw.

    This is a view of a green metal roof panel with a crack in the metal.

    As a temporary fix, I used some clear np1 to seal this area.

    This is a view of the green metal roof panel that was sealed.

    Go To Pin
  2. 2
    Crack in metal panel #2

    Just like the other crack, this one is right on the rib of the metal. I would say these were created by the metal panel getting bent up by the wind and the metal panel may have cracked due to the stress put on those ribs.This is a view of green metal roof with crack in it. This is a view of the green metal panel with a crack sealed.

    Go To Pin
  3. 3
    Cracked panel #3

    Now this crack was much more severe than the other 2 as it could almost be labeled as a hole. This is a view of a green metal roof panel with a large crack.This is a view of a green metal roof with a patch over a cracked area.

    Go To Pin

Inspection video

  1. 1
    Roofing Inspection video

    In this video I go over several things from cracked metal panels, screws backing out, to loose metal roofing panels. 

    Go To Pin

Call Us – (865) 297-3286

Visual Marketing By Lead Symphony

Job Location

This area is an approximation and does not represent the exact location