Table of contentsShow Table of ContentsHide
- 1Crack in metal panel #1
Once I came up over the roof I saw there was a crack in the panel and looked around and noticed a few more but this was the first one I saw.
As a temporary fix, I used some clear np1 to seal this area.Go To Pin
- 2Crack in metal panel #2
Just like the other crack, this one is right on the rib of the metal. I would say these were created by the metal panel getting bent up by the wind and the metal panel may have cracked due to the stress put on those ribs.Go To Pin
- 3Cracked panel #3Go To Pin