5 Like Unlike

Lots of Repairs for Old Toofs and Gutters

  1. 1
    The flashing along all walls is not installed correctly

    Flashing along these walls is not installed correctly there’s not step flashing between each shingle.  It’s not really possible to talk about replacing the flashing without replacing the roofs. So what we will be proposing is to seal the top of the flashing and where the flashing meets the shingles as best as possible.

     

    Picture below shows that there’s no step flashing on these walls.

    Go To Pin
  2. 2
    Replace all the front gutters but not the downspouts

    Replace all the front gutters but not the downspouts.  This seems to be the only possible course of action here. These gutters have water that’s over topping and getting into some of the units here. New gutters will resolve this problem.

    Go To Pin
  3. 3
    Remove all satellite dishes on this roof

    Remove all satellite dishes on this roof and siding.  The satellite dishes are part of the scope to remove and seal as best as possible on the roof and stucco.

    Go To Pin
  4. 4
    This old metal ridge vents will be replaced with new shingle over ridge style ridge vents

    The spec calls for on the ridge vents on the entire facility. Getting rid of old metal ridge vents that are prone to leak will be a nice upgrade for these buildings. Here’s some pictures of the ridge vent in current condition and the material that we will propose for these ridge fence.

    Go To Pin
  5. 5
    All these pipe boots need to be replaced and these roofs need to be gone over very well

    As you can see from the photo their nails popping in many locations on this roof. These all need to be sealed up as best as possible. There are quite a few soft spots, we recommend unless the spots are caving in and in really horrible shape to stop whatever leak is around the soft plywood. These roofs need gone over very well.

    Go To Pin

Visual Marketing By Lead Symphony – Patent Pending

Litespeed Construction Knoxville