Search
Close this search box.

Call Us For A Free Estimate

Soffit, fascia, and gutter replacement Knoxville, TN.

So these customers had some issues with the existing soffits. It’s time for paint for the soffit and facia, and they decided to use vinyl siding instead of soffit plywood material. Replacing the gutters and adding new gutter guards are also part of this project.

After Photos of Roof Repairs

  1. 1
    Replaced roof boards added drip edge and added back new shingles

    Replaced roof boards added drip edge and added back new shingles.  We repaired the roof before we came back and did the facia soffit and gutters. There was damage to all the edges of the roof that needed to be repaired.

    This picture showing repairs the edge of a roof the roof color is gray

    Go To Pin
  2. 2
    This is a video of the roof inspection after completed roof work

    These roof repairs include replacing the deck boards at the edge of the roof adding new drip edge and adding shingles back at all eaves of the roof. We also did repairs to commercial roofing including adding drip edge and covering the drip edge with roofing cement.

    Go To Pin

Problems with the edges of the roof

  1. 1
    This commercial roof is in good shape except the edges

    Commercial roof over a porch

    These are the after photos of the added drip edge to this commercial roof.

     

    This is a commercial roof coating going over a commercial roof This is a picture of a commercial drip edge over the top of it

    Go To Pin
  2. 2
    The gable has no drip edge on this roof

    This gable has an edge trim but not a drip edge. There doesn’t appear to be any issues with the gable edges of the roof. But there is rot at the eve of the roof near the gutter all the way around the Home.

    Go To Pin
  3. 3
    Roof leaking at edge of commercial roof

    Roof leak on edge of roof causing leaks

    Go To Pin

New Soffit Fascia and Gutters

  1. 1
    New Fascia Metal

    Do you facia metal protect the facia boards from rot.  This will also make these boards maintainance free.

    Go To Pin
  2. 2
    The Hidden Vent Soffit Allows Air to Breathe into the Attic Space

    Hidden soffits are attractive.  They can be laid directly over the existing plywood soffit.  How do these soffits breathe properly?  We will cut the existing plywood soffit to allow air to breathe into the attic space.

    Go To Pin
  3. 3
    We do no use Factory Mitres for our Gutter Corners

    These factory miters are not used on our projects. We use outside and inside strip mitres on our seamless aluminum gutters.

    Go To Pin

Stainless Steel Micromesh Gutter Guards

  1. 1
    Drip Edge Installed before Gutter Guards

    Installing drip edge when we are repairing the roof will make the most sense.

    We can install this micromesh gutter guard on top of the drip edge and underneath the shingles.

     

     

    Go To Pin
  2. 2
    Stainless Steel Micromesh Gutter Guards

    Stainless steel micromesh gutter guards

    These gutter guards keep out all debris from this roof. This includes all Pine needles granules and leaves along with leaf debris.

    Go To Pin

Call Us – (865) 297-3286

Visual Marketing By Lead Symphony

Job Location

This area is an approximation and does not represent the exact location