Table of contents
- Valley protection
- The pictures in this photo is a porch similar to our project house. You can see there are several facets and details involved, as well as extra ridge cap shingles and flashing materials.
- Ridge vent and ridge cap
- Apply 7/16 inch OSB over existing boards
![](https://litespeedconstruction.com/wp-content/uploads/2020/12/1DA307A0-6076-46A3-848C-10376B8DDA4C.jpeg)
- 1Valley protectionGo To Pin
- 2The pictures in this photo is a porch similar to our project house. You can see there are several facets and details involved, as well as extra ridge cap shingles and flashing materials.Go To Pin
- 3Ridge vent and ridge cap
In these photos, you can see hell a ridge vent works. The gap is Kurt in the decking at the ridge of the structure to allow hot air to escape at the highest points of the attic. A hard plastic ridge vent and ridge cap shingles are applied over the gap to allow are you super heated air to escape while preventing leaks.
Go To Pin - 4Apply 7/16 inch OSB over existing boardsGo To Pin