Litespeed Construction did a repair on this steep metal roof in Caryville, TN. The roof had a metal panel that got blown up from the wind. Upon inspection we found that there was not enough screws on the panel so that is why it was easy for it to come up. We added all necessary screws to these panels and added screws to all the ridge panels. Screws were also added to the transition metal on both sides of the roof. All of the pipe boots were maintenanced to make sure that no leaks occur.
Table of contentsShow Table of ContentsHide
- 1Loose Metal Panel
The metal panel at the front of the house came up during a storm. Upon inspection it was found that there was not enough screws on this and other panels. The necessary screws were added to the roof panels. Screws were also added to all of the transition metal. The pipe boots on this roof were also serviced to ensure that no leaks occur.Go To Pin
- 2Damaged Siding
The back side of the roof had damaged siding that could very well be caused of leaks inside the home. These areas were sealed to prevent water from getting in.Go To Pin
- 3Video Inspection of RoofGo To Pin