When the Knoxville Roofers inspect a commercial roof leak, they need to be reviewing all of the reflashing‘s penetrations and areas around the leaking area. This is because these areas can all be potential problems and reasons for the leak. In this thorough inspection, there is a TPO wall in the room. The leak must be repaired and examined thoroughly once we remove the gutter. There are several locations on the shingle roof of this property that could potentially be causing this leak. And we wanted to make sure that we addressed the mechanical unit that has rust and standing water on it because this could certainly be a cause for roof leaks on this commercial Roof in Knoxville Tennessee Tennessee.
Table of contentsShow Table of ContentsHide
- 1Rusting Duct Work on a roof
Ductwork is rusting and will be a problem. We are recommending cutting the entire above roof duct structure. This could certainly be a reason for it to leak currently in coding or prevent this from happening. The joints need to be coated well to prevent leaking.Go To Pin
- 2The roof service needs to be cleaned and prepped before roof coating
The roof service needs to be cleaned and prepped before coating. Once the surface has been cleaned, applying a rust-inhibiting primer and a top coat is OK to prevent leaks.Go To Pin