Standing Seam Metal Roof Repair

This is a piece of metal ridge cap that needs to be replaced.  If this metal ridge cap is not replaced, it could leak into this metal roof and cause problems for this customer.

So this panel of Metal has to be covered to prevent roof leaks this is not all the way across the section of the roof this is near Valley and this one piece of the panel did not come all the way up to the transition flashing. This can definitely cause roof leaks and we will need to cover this while we are repairing this roof.

This metal roof has a couple of different locations that need to be caulked this is one of the main ones. And we also need to caulk the front window on the dormer as well.

This transition is pulling up and we will need to replace this to prevent this roof from leaking.

We sealed up where the siding meets the metal to prevent any water from getting through there.

We sealed up the front portion of the siding to prevent any water that runs off from getting into the home.

Added new metal to 2 ridge caps that were exposed. This will preven water from running down inside

Used gasket screws to prevent leaks from holes.

Added a new piece of metal about 20 feet long to cover transition flashing and sealed. Used gasket screws to prevent leaks. This will ensure that water runs off instead of running back and into the home.

We resealed all spots that had old caulking. We also sealed any cracks that could possibly be the culprit of leaks.