Call Us For A Free Estimate

32 Like Unlike

Roof Leak or Chimney leak Knoxville, TN

It is important to look at several things when determining what is making a chimney leak.  The bricks or siding can certainly be a cause.  A bad or worn out chimney cap can cause roof leaks.  And the flashing that is where the chimney meets the shingles will be a common reason that chimneys leak.

In this page Litespeed Construction describes what caused this chimney to leak.

Brick and mortar soaking up water

  1. 1
    Moisture Reading at the brick of the chimney.

    As you can see the moisture level is higher than it should be. The normal level is about 16 to 21 percent. Levels on this chimney are at 89.2 and 70.8.

    This is an image of a moisture reader indicating moisture detected.

    This is an image of a moisture detector indication moisture detected behind the brick.

    Go To Pin
  2. 2
    Additional moisture readings.

    Moisture levels are above 82 percent. This means water is penetrating the brick and mortar. Soaking it up like a sponge and getting in the house. 

    The moisture reader detected high percent of water behind the brick of the chimney.

     

    Go To Pin
  3. 3
    Holes and cracks in brick and mortar

    Note the openings, cracks, and missing mortor on the chimney.

    This is showing the holes and cracks in the brick and mortar of the chimney.

     

    Go To Pin

View from corner of chimney

  1. 1
    Mortar breaking apart

    Another very large hole in the mortar in which water can penetrate. 

    This is an image of cracks in the brick and mortar of the chimney.

    Go To Pin
  2. 2
    More areas for water to get in.

    Just another couple of places for water to get in. From failing brick and mortar. 

    A view of very large openings and holes in the brick of the chimney.

     

    Go To Pin

Call Us – (865) 297-3286

Visual Marketing By Lead Symphony

Job Location

This area is an approximation and does not represent the exact location