Call Us For A Free Estimate

1484 Like Unlike

Litespeed Construction inspected this roof with installation issues. This roof was laid over another roof with three tab shingles. All of the shingles on this roof have nails that were overdriven and are not holding down that shingles.

2 Layer Roof With Issues

  1. 1
    Overdriven Nails

    All of the shingles on this roof were overdriven and are not holding down the shingles. Any time there is high winds this roof will be vulnerable to having shingles blowing off. There has already been shingles replaced.

    This is a picture of shingles that have overdriven nails This is a picture of shingles that got replaced previously

    Go To Pin
  2. 2
    No Drip Edge

    This roof does not have any drip edge around the home. Drip edge is important to make sure that no water rots out the wood at the edges

    This is a picture of shingles with no drip edge

    Go To Pin
  3. 3
    Flat Roof With Issues

    This home has a flat roof on the front side that also has issues with the installation. The tpo doesn’t seem to be glued down, certain areas don’t have the appropriate drip edge and the corners need to be redone. The corners need new patches to ensure that no water enters the home.

    This is a picture of a flat roof that ties into a shingle roof This is a picture of a corner that needs a new tpo patch This is a picture of a tpo roof that needs drip edge

    Go To Pin
  4. 4
    Video Inspection
    Go To Pin

Call Us – (865) 297-3286

Visual Marketing By Lead Symphony

Job Location

This area is an approximation and does not represent the exact location