Call Us For A Free Estimate

39 Like Unlike

There’s several places that this metal roof is having problems. This is the original metal roof installed 20 years ago.

So the repairs at litespeed construction is going to make are going to be replacing one piece of ridge cap that was blown off. Adding a new transition flashing.

A piece of ridge cap needing to be replaced

  1. 1
    This is a piece of metal ridge cap that needs to be replaced

    This is a piece of metal ridge cap that needs to be replaced.  If this metal ridge cap is not replaced it could leak into this metal roof and cause problems for this customer.

    Go To Pin

This is a piece of transition flashing that needs to get covered to prevent roof leaks

  1. 1
    This transition flashing needs to be covered there’s Rotten wood here

    This is a picture of a metal roof that has a gap between a panel and flashing in Knoxville Tennessee

    So this panel of Metal has to be covered to prevent roof leaks this is not all the way across the section of the roof this is near Valley and this one piece of the panel did not come all the way up to the transition flashing. This can definitely cause roof leaks and we will need to cover this while we are repairing this roof.

    Go To Pin

This dormer needs to be caulked in the front and up the sides

  1. 1
    This flashing needs to be caulked and so does the front of the Dormer

    This metal roof has a couple of different locations that need to be caulked this is one of the main ones. And we also need to caulk the front window on the dormer as well.

    This is a picture of a window that needs to be caulked on a metal roof dormer

    This is a gap between a window and siding that needs to be caulked

    Go To Pin

This is a piece of transition flashing that we need to flash over there is problems here

  1. 1
    We are going to add new metal flashing at this metal roof transition

    This flashing is pulling up on this metal roof

    This transition is pulling up and we will need to replace this to prevent this roof from leaking.

    Go To Pin
  2. 2
    This is the dormer that we need to caulk the window and the flashing
    Go To Pin

Sealed Up Dormer

  1. 1
    Sealed Siding

    We sealed up where the siding meets the metal to prevent any water from getting through there.

    Go To Pin
  2. 2
    Sealed Dormer

    We sealed up the front portion of the siding to prevent any water that runs off from getting into the home.

    Go To Pin

Sealed Ridge Cap

  1. 1
    Added New Metal To Ridge Cap

    Added new metal to 2 ridge caps that were exposed. This will preven water from running down inside

    Go To Pin
  2. 2
    Attached Ridge Cap

    Used gasket screws to prevent leaks from holes.

    Go To Pin

Transition Flashing Sealed

  1. 1
    Transition Flashing That Was Covered

    Added a new piece of metal about 20 feet long to cover transition flashing and sealed. Used gasket screws to prevent leaks. This will ensure that water runs off instead of running back and into the home.

    Go To Pin

Sealed Up All Cracks

  1. 1
    Sealed All Cracks

    We resealed all spots that had old caulking. We also sealed any cracks that could possibly be the culprit of leaks.

    Go To Pin

Call Us – (865) 297-3286

Visual Marketing By Lead Symphony

Job Location

This area is an approximation and does not represent the exact location