Old Three Tab Roof

  1. 1
    No Ridge Vent

    This home currently does not have any ridge vent and we will need to install a plastic ridge vent and ridge cap shingles to make sure that the roof ventilated properly.

    This is a picture of an old three tab roof without a ridge vent

    Go To Pin
  2. 2
    Old Three Tab Shingles

    The roof decking feels solid but it does have old three tab shingles. We will be installing an Owens Corning Dimensional shingle. We will also be getting rid of the attic fans.

    This is a picture of an old three tab roof with metal inside the valleys This is a picture of an attic fan on an old three tab roof

    Go To Pin
  3. 3
    Chimney Flashing Needs To Be Redone

    The chimney flashing in this roof will need to be redone when the new roof is installed. We will be using step flashing and counter flashing over it.

    This is a picture of a brick chimney with bad flashing

    Go To Pin
  4. 4
    Gutters Fascia and Soffit

    The gutters on this home will all need to be replaced as most of them are falling off the house. About 75% of the fascia will also need to be replaced along with a section of wood soffit.

    This is a picture of a gutter that is falling off the house This is a picture of a gutter that is falling off the house

    Go To Pin

Visual Marketing By Lead Symphony – Patent Pending

Litespeed Construction Knoxville