Commercial Flat Roof Replacement

  1. 1
    Membrane Installation

    The TPO membrane will be adhered to the wall using a T-bar. This will go along three of the walls, while the front backside will have a commercial drip edge leading down into the gutters.

    This is a picture of t bar that will hold onto the membrane on the wall This is a picture of the side that will get commercial drip edge

    Go To Pin
  2. 2
    Flat Roof Has Damage That Could Be Leaking

    This flat roof has areas where it is cracked and could be letting water into the building. The corners and the edges of the wall are the most affected areas.

    This is a picture of the corner of a commercial flat roof with damage This is a picture of the edge of a wall on a commercial flat roof with damage

    Go To Pin
  3. 3
    Areas Of Detail On Commercial Flat Roof

    This commercial flat roof has numerous HVAC units on the backside. These units will not need to be removed to replace the roof but will need special attention to make sure that these areas do not leak.

    This is a picture of an hvac unit on top of a commercial flat roof This is a picture of an hvac unit on a commercial flat roof

    Go To Pin

Visual Marketing By Lead Symphony – Patent Pending

Litespeed Construction Knoxville