Search
Close this search box.

New TPO Flat Roof

  1. 1
    During Installation

    For this flat roof we used half inch fiber boards that were mechanically fastened. The membrane was glued down with TPO glue and then heat welded at the seams. 
    This is a picture of red fiber board that is mechanically fastened under tpo

    Go To Pin
  2. 2
    TPO At The Door

    The TPO membrane was ran all the way up the door to prevent any leaks into the home. The membrane was then fastened down with t-bar.

    This is a picture of tpo fastened with t bar at a doorway

    Go To Pin
  3. 3
    New Drains

    Both of the drains were remade using TPO. This will ensure that no leaks will happen through here since all of the water will be going to these areas. Flashing tape and cover tape were used to seal off the seams.

    This is a picture of a new white TPO drain This is a picture of white tpo flat roof with t bar

    Go To Pin

Visual Marketing By Lead Symphony – Patent Pending