Knoxville Roofers Inspects Commercial Flat Roof. Litespeed Construction inspected this commercial flat roof that is considering a new one. This roof will require the removal of the rock that covers the entire roof. There will also be some roof manipulation that will need to be done due to all of the HVAC units on the back side of the roof. This roof will be covered with a two-inch ISO board and TPO membrane.
Commercial Flat Roof Replacement
Table of contents
- Membrane Installation
- Flat Roof Has Damage That Could Be Leaking
- Areas Of Detail On Commercial Flat Roof
- 1Membrane Installation
The TPO membrane will be adhered to the wall using a T-bar. This will go along three walls, while the front backside will have a commercial drip edge leading down into the gutters.
Go To Pin - 2Flat Roof Has Damage That Could Be Leaking
This flat roof has areas where it is cracked and could be letting water into the building. The corners and the edges of the wall are the most affected areas.
Go To Pin - 3Areas Of Detail On Commercial Flat Roof
This commercial flat roof has numerous HVAC units on the backside. These units will not need to be removed to replace the roof but will require special attention to ensure that these areas do not leak.
Go To Pin