Litespeed Construction inspected this roof with installation issues. This roof was laid over another roof with three-tab shingles. All the shingles on this roof have nails that were overdriven and are not holding down those shingles.
2 Layer Roof With Issues
- 1Overdriven Nails
All of the shingles on this roof were overdriven and are not holding down the shingles. Any time there are high winds this roof will be vulnerable to having shingles blowing off. There have already been shingles replaced.
Go To Pin - 2No Drip Edge
This roof does not have any drip edge around the home. Drip edge is essential to make sure that no water rots out the wood at the edges.
Go To Pin - 3Flat Roof With Issues
This home has a flat roof on the front side that also has issues with the installation. The top doesn’t seem to be glued down, certain areas don’t have the right drip edge, and the corners need to be redone. The corners need new patches to ensure that no water enters the home.
Go To Pin - 4Video Inspection
This YouTube content requires your consent to load.
Go To Pin