Table of contents
- Yes this is new metal work!!!
- Is it just lazyness? Or carelessnes?
- 3 inch nails in 3/4 inch wood???
- more metal work they called drip edge
- 1Yes this is new metal work!!!
Drip Edge was not installed correctly.
Go To Pin - 2Is it just lazyness? Or carelessnes?
The installation of this drip edge is not installed correctly.
Go To Pin - 33 inch nails in 3/4 inch wood???
Why anyone would use 3-inch nails in such thin wood is beyond me. These nails were put in under the architectural tab of the shingles through the bottom shingle and through the metal and fascia, leaving the remaining 2 and a half inches sticking out the back of the wood. Bottom line, Sloppy work!
Go To Pin - 4more metal work they called drip edge
- The metal they used wasn’t bent properly, was too thin metal for how they bent it. Results = wavy, bent up, crooked, sloppy-looking work.
Go To Pin - The metal they used wasn’t bent properly, was too thin metal for how they bent it. Results = wavy, bent up, crooked, sloppy-looking work.
