41 Like Unlike

Flat Roof Needing Repairs Due to Leaks

  1. 1
    Various Amounts Of Debris That Needs To Be Removed From Flat Roof

    This is the various amounts of debris located throughout the flat roof that was recommended be removed. Litespeed Construction will remove all debris.
    This is a picture of debris on a flat roof that needs to be removed This is a picture of debris that needs to be removed from flat roof This is a picture of debris that needs to be removed from flat roof

    Go To Pin
  2. 2
    All Cap Joints Need To Be Sealed

    There is a total of 37 bell cap joints that need to be sealed. All of them are in bad shape and could be causing water to get through and in between the membrane.
    This is a picture of bell cap joints that need to be sealed
    This is a picture of bell cap joints that need to be sealed This is a picture of bell cap joints that need to be sealed

    Go To Pin
  3. 3
    Splices And Voids That Need To Be Fixed With TPO Flashing Tape

    These are all of the splices and voids that need to be cleaned, prepped and covered with TPO flashing tape. These small areas could be the cause of water getting through underneath the membrane and into the home.
    This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape
    This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape This is a picture of a splice in the membrane that needs to be covered with TPO flashing tape

    Go To Pin
  4. 4
    Flat Roof Drain Needs To Be Reflashed

    The drain on this flat roof will need to be reflashed to prevent any leaks since all the water comes down to this point. Litespeed Construction is also recommending cleaning out the drain box as it is full of debris.
    This is a picture of a flat roof drain that needs to be reflashed This is a picture of a flat roof drain that needs to be reflashed This is a picture of a drain box that needs to be cleaned out

    Go To Pin
  5. 5
    Voids In The Metal That Need To Be Sealed

    There are voids in the sheet metal flange that need to be sealed to prevent any water from getting through.
    This is a picture of a void in the sheet metal flange that needs to be sealed This is a picture of a void in the sheet metal flange that needs to be sealed

    Go To Pin
  6. 6
    Pipe Boot Needs To Be Clamped

    The pipe boot on top of the metal roof needs to have a stainless steel clamp.
    This is a picture of a pipe that is missing a clamp

    Go To Pin
  7. 7
    Disbonded Membrane

    The membrane is disbonding from most of the wall and will need to be cut to add a new layer of membrane that will be bonded to the wall.
    This is a picture of the membrane that is coming off of the wall This is a picture of the membrane that is coming off of the wall
    This is a picture of membrane that is coming off of the wall

    Go To Pin
  8. 8
    Outside Wall Needs Repairs To Stop Moisture

    The outside brick wall could be letting moisture in that is leading to the boards being wet underneath the membrane. Sealing cracks and ridge caps is recommended.

    This is a picture of the moisture in the boards underneath the membrane This is a picture of the outside walls that needs repairs

    Go To Pin
  9. 9
    Brick Wall Needs To Be Coated

    This brick wall that is 14’ high should be coated to prevent any moisture from getting through and inside the home.

    This is a picture of a brick wall that needs to be coated to prevent moisture from getting theough

    Go To Pin

Visual Marketing By Lead Symphony – Patent Pending

Litespeed Construction Knoxville