Search
Close this search box.

Replacing Ridge Vent, Wood, Flashing And Shingles At Building 6

  1. 1
    Replacing Damaged Ridge Vent On Roof Over Stairs

    This ridge vent needs replacing as it has damage that extends 10 feet long. It has cracks along the ridge vent with some shingles breaking down at the top. It also has exposed nails that could cause leaks.
    This is ridge vent on a roof over stairs that has damage ten feet long

    Go To Pin
  2. 2
    Repair Rotten Wood Where The Gutter Downspout Comes Out

    This 3’x4’ section of wood will need to be replaced as it is rotten and is bowing down. Step flashing will also need to be installed here. The downspout lets all the water out in this area, so we recommend adding an elbow to the gutter.

    Rotten wood that needs to be replaced where the downspout comes out

    Go To Pin
  3. 3
    Reattaching Vinyl Soffit

    This white vinyl soffit will need to be reattached to the ceiling.
    This is white vinyl soffit that needs to be reattached to the ceiling.

    Go To Pin
  4. 4
    Step Flashing To Be Replaced

    One piece of step flashing will need to be replaced near the gutter.
    One piece of step flashing will need to be replaced here behind the siding.

    Go To Pin
  5. 5
    Damaged Shingles That Need To Be Replaced

    This 4’x6’ section of shingles will need to be replaced. This is an area with shingles that are damaged or previously been repaired.
    This is four foot by 6 foot section of shingles that will need to be replaced.

    Go To Pin

Visual Marketing By Lead Symphony – Patent Pending