As you can see, not only are the gutters in need of replacement, but the replacement gutters could use some gutter guards to prevent the gutters from becoming clogged full of debris.

See this on Google.

As you can see, this gutter is in terrible shape. It’s literally about to fall off the roof. 

See this on Google.

The metal flashing is not installed correctly. The upper portion of the metal flashing should be under the metal roof, leaving the bottom sticking out. This flashing relies only on caulk to keep the water out. And the caulk is beginning to fail.

See this on Google.

This is what a proper install would look like!

Like the front gutter, the rear is just as bad, if not worse. Tree branches have hit them, all bent up, and are holding water.

See this on Google.

There is a hand full of loose screws I noticed on the front section of the roof. The screws on the roof's edge weren't lined up with the wood, so the wind could blow up this section.

See this on Google.