Proposed silicon roof coating for administrative portion of roofing.
Proposed TPO overlay over existing rubber roof on right and left roof edges.
Aerial Image of Roof
Table of contents
- Inspection Video
- Rubber roof is lifting here
- Administration portion of roof
- Left side of rubber roof
- 1Inspection VideoGo To Pin
- 2Rubber roof is lifting here
The section of the rubber roof is lifting in this picture. Also, the edge metal and the interface of the rubber to the metal roof are in terrible shape. We will address these things on the upper section of this roof when we do repairs.
Go To Pin - 3Administration portion of roof
The administrative portion of this roof is where there are offices and classrooms. This section of the roof would need to be coated. The coatings we would install would require a thorough clean of the roof plus Flash at penetrations And a silicone topcoat over the EPDM rubber roof. We are proposing Aldo roof coating here.
Go To Pin - 4Left side of rubber roof
The left and right sides of this roof looked the same. It will be the same solution that we propose: adding new TPO roofing from the metal roofing panels to the edges of the roof. Includes a new drip edge and cover tape here to ensure that these portions of the roofing will not leak.
Go To Pin