Knoxville Roofer repairs a roof with failing Gables. This project has a gable that has a lot of failures due to support issues. This roof needs to be replaced, and how do we help the edge of this gable to keep it from falling. Litespeed Construction will most likely propose a support system based in Gables being supported by corbels. This will support the right edge of the roof line so that it does not fall off. The next question is, how do we Make this roof look good from the ground. Do we consider putting back vinyl soffits and manipulating the Siding, or do we keep the soffits open and possibly manipulate the Siding below the gable. The corbels will go into the Siding, So the way the Siding is flashed will be essential here.
This is a picture of the back room getting replaced
- 1Is the picture of the underneath of this roof line
This is work being done to the backside of this property.Go To Pin
This is an Image of the Roof from the Back of the Home
Table of contents
- This roofline will need to be supported and we will also need to make some changes to the siding
- This is a picture of the proposed vinyl soffit sample
- This is an image of some wood corbels that we are having made for another project
- The section of roof needs to be tied in better
- This will need new facia boards and gutters
- 1This roofline will need to be supported and we will also need to make some changes to the siding
This roofline has to have corbels to support and most likely this soffit overhang needing to be replaced. We would need to replace the siding here to do this job properly. Because the corbels will be cut into the siding and the siding should go all the way up to the bottom of the roofline if the customer wants to consider keeping an open soffit look.Go To Pin - 2This is a picture of the proposed vinyl soffit sample
Go To Pin - 3This is an image of some wood corbels that we are having made for another projectGo To Pin
- 4The section of roof needs to be tied in better
When this roof gets done the section will need to be most likely built up with membrane roofing. And flashed back to the upper slope. Remembering that we are most likely going to recommend will be a TPO screwed down over some insulation board.
Go To Pin - 5This will need new facia boards and gutters
This will need new facia boards and gutters. The section of roof will need more facia boards and gutters because it is open and exposed to the elements we will put facia metal over the top before we add that new gutters.
Go To Pin
How to Repair an Unsupported Roof Line
Table of contents
- This is what corbels look like before they get installed on a roof
- This is a picture of the proposed roofing that we are recommending which is in Owens corning Shingle
- This siding should be replaced because the corbels will cut into the siding and it could leak
- 1This is what corbels look like before they get installed on a roof
These are wooden corbels were using on different jobs to support a roofline. I think this is what our customer might be interested in having. We would use a combination of corbels and facia wood at the edges of the roof to support this roofline on the two main Gables of the home.
Go To Pin - 2This is a picture of the proposed roofing that we are recommending which is in Owens corning Shingle
Here’s the picture of the Owens Corning Oak Ridge Shingle colors.
Go To Pin - 3This siding should be replaced because the corbels will cut into the siding and it could leak
This siding should be replaced to properly repair the edge of this roofline.
Go To Pin
This Roof Line Needs to be Supported
- 1Kirby Call with Daniel
The same meeting
Go To Pin
