Metal Roof Coating That Is Failing Must Be Restored in Knoxville
When a roof coating or paint is not applied correctly and fails, it needs to be restored or replaced. This home/castle had a roof coating that failed. Preparing the substrate is very important and will be the first step. After this, we will prepare the flashing with a combination of fabrics and Aldo 385 flashing cement. Lastly, we will coat the roof with a top coating.
Aldo Metal Roof Coating Will Resolve these Roof Leaks
- 1Aldo Metal Roof Coating System
Go To Pin
Roof Coating needs to be Replaced or Repaired on this Entire Roof
Table of contents
- This Roof Coating Has Failed at Several Locations on this Metal Roof
- Roof Coating at Dormer
- Metal Roof Meeting the Wall and there is a Leak at a Scupper Drain
- Aldo Metal Roof Coating System
- 1This Roof Coating Has Failed at Several Locations on this Metal Roof
Prep work will be imperative for the restoration of this roof. This old roof coating was not installed correctly, and we need to prepare the subsurface before we attempt to coat over this.
Go To Pin - 2Roof Coating at Dormer
This dormer has problems with flashing. This will be addressed when the roof is repaired. Using Aldo 350 This will never be a problem again.
Go To Pin - 3Metal Roof Meeting the Wall and there is a Leak at a Scupper Drain
This wall will need extra attention to detail during construction. It is vulnerable to leaks due to the water going through this scupper drain.
Go To Pin - 4Aldo Metal Roof Coating SystemGo To Pin