Knoxville Roofers will be installing a new TPO flat roof at this home. This home has had several leaks, and it has an old EPDM roof. The roof will be mechanically fastened. We will be using the 1/2-inch board and white TPO.
New TPO Flat Roof
- 1During Installation
For this flat roof we used half inch fiber boards that were mechanically fastened. The membrane was glued down with TPO glue and then heat welded at the seams.
Go To Pin - 2TPO At The Door
The TPO membrane was ran all the way up the door to prevent any leaks into the home. The membrane was then fastened down with t-bar.
Go To Pin - 3New Drains
Both of the drains were remade using TPO. This will ensure that no leaks will happen through here since all of the water will be going to these areas. Flashing tape and cover tape were used to seal off the seams.
Go To Pin
TPO Flat Roof Installation
- 1EPDM Roof Gets Replaced With TPO Roof
This EPDM roof has had several leaks in the past and also has had repairs made to it. It is time for a roof replacement, and we will be using a mechanically fastened TPO roof system on this home.
Go To Pin