Tapered commercial roof insulation Knoxville, TN.
Tapered commercial roof insulation is meant to have water rolling off. Usually, when tapered insulation is used, a contractor will install a membrane roof over the top of the insulation. TPO is used on this job.
TPO Roof installed
Table of contents
- Edges of Roof screwed down with Tbar.
- TPO Seams welded together.
- New deck boards added
- TPO Materials on the roof ready for install.
- 1Edges of Roof screwed down with Tbar.
Edges of the roof screwed down with TBAR and sealed. Makes the TPO roof strong.
Go To Pin - 2TPO Seams welded together.
TPO seams are heat welded together to cover the screws and make the roof strong.
Go To Pin - 3New deck boards added
Rotten boards had to be replaced before we added new roof.
Go To Pin - 4TPO Materials on the roof ready for install.
Used 60 ml GAF Everlast Tpo on this job. And 1/4” to foot iso boards to help the roof drain water.
Go To Pin
Mechanical fastened 60 ml TPO roof
Table of contents
- Piranah plates made to attach to the membrane.
- Tapered ISO Boards install
- Glue the membrane as well as mechanical fastening to the roof.
- 1Piranah plates made to attach to the membrane.
Piranha plates were made to attach the Membrane to the roof boards.
Go To Pin - 2Tapered ISO Boards install
Tapered ISO boards will better insulate the building. Also will allow water to shed the roof faster. We added 1/4”/foot of pitch to the roof.
Go To Pin - 3Glue the membrane as well as mechanical fastening to the roof.
Glue the membrane, as well as mechanical fastening, added at the roof perimeter. This will make the TPO more wind resistant and stronger.
Go To Pin